HGM6010K generator set control panel

HGM6100K series generator controller integrating digital, intelligent and network techniques is used for automatic control system of diesel generator. It can carry out functions including automatic start/stop, data measure and alarming. ??The controller uses LCD display, optional Chinese and English display interface with operation easy and reliable.?
HGM6100K series generator controller uses micro-processing technique which can carry out precision measure, constant value adjustment, timing and threshold setting and etc. of multi-parameters. It can be widely used in all types of generator automatic control system for compact structure, advanced circuits, simple connections and high reliability.?
PERFORMANCE AND CHARACTERISTICS
HGM6100K controller has four types:
HGM6110K/6110KC: Automatic Start Module, it controls generator to start/stop by remote start signal;
HGM6120K/6120KC: Based on HGM6110K/6110KC and add mains AC monitoring, Mains/Generator automatic switching control functions (AMF), especially suitable for the automation system composed by Mains and Generator.
Note1: HGM6110KC/6120KC with RS485 interface, HGM6110K/6120K without RS485 interface.
Note2: And then take HGM6110KC/6120KC with text as an example to describe.
« Using microprocessor as a core, symbol LCD with backlight display, the three languages display Chinese, English and Spanish, key touch operation;?
« Have a RS485 port with Modus communication protocol;?
« Adapt to 3phase-4wires, single phase-2wires or 2phase-3 wires (120/240V) , 50/60Hz AC power system;
« Precision measure and display of
« Measure and display 3 phase voltage, 3 phase current, frequency, power etc. parameter of Mains and Gens;
« Mains have over voltage, under voltage, loss phase function; Gens have over voltage, under voltage, over frequency, under frequency, over current function;
« Precision measure and display parameters about Engine
« Control protection: Automatic crank/stop of diesel engine, load transfer(ATS control) and completely faults display protection;
« With ETS, idle control, pre-heat control, raises speed control functions, and all types of them are belong to relay output;
« Parameters setting: Allow user to modify setting and store them by inside internal FLASH memory, the parameters can not be lost even with power off. All of parameters can be set not only from the front panel, but by PC via SG72 (an adaptor, USB-LINK-RS485) module; or, through RS485 port via PC;
« Most of temperature, pressure, oil level sensor can be directly used, and also user can define sensor curve by themselves;
« Multiple crank disconnection conditions can be selected.(Speed sensor, oil pressure, gens);
« Power supply range is wide(8~35)VDC, accommodating to different starting battery voltage environments;
« All parameters use digital modulation, abandoning analog modulation using conventional electronic potentiometer, more reliability and stability;
« Modular configuration design, Flame Retardant ABS plastic shell, inserted type connection terminals, flush type installation, compact structure, easy installation.

资料下载

PREV 文章：HGM6210 Genset Controller

NEXT 文章：Generator Control System Product details